Using the idea from this post of beanie hats from a tutorial at The Rubber Punkin, I made these cute beanie hats (and the purses, too) using old t-shirts (and some I bought cheap at the thrift store).

They will be sold at the Country Store during the Texas County Free Fair at the OHCE area.  I also made some more ribbon tag blankets from this tutorial.

Everything turned out cute and was well-received by the other members at extension group tonight.  The fair starts August 12th!

Gardener's Apron

What have I been up to lately?  Sewing.  Seam ripping.  Why, you ask?  I chose to make a gardener's apron for entry in the upcoming county fair for the extension group I'm in called "A-ha!"  I am not a wonderful seamstress, and I don't have a lot of patience when it comes to new techniques or materials.  Bias tape was new, and my patience was thin by late last night.

Bias tape--my conquered enemy

 

Waistbands--not a friend

Four huge pockets and more bias tape

But, I'm done.  It looks pretty good, and I won't embarrass myself by having my name on it now.  I used this pattern (altered somewhat in length and width) from a crafter's apron at Martha Stewart.com along with these sites and/or pictures:
Make It Do
Busty LaRue's Glitz and Glamour
GenevaDesigns on Etsy
GreatGoods on Etsy
All materials were purchased at my local Wal-Mart Supercenter.

1% inspiration + 99% perspiration = one gardener's apron

Now, back to getting the libraries ready for the new school year soon to begin...

Tee-Bags, T-shirt Totes, Recycled T-shirt Shopping Bags--Whatever You Call 'Em--They're GREAT!

After a quick trip to the local thrift shop (on $2 bag day, no less!), I was stocked up on t-shirts for this project.

To begin, choose your t-shirt.  This may be the most difficult part!  My son chose this one since it was from a preschool he went to a couple of years ago.

Next, turn your t-shirt inside out.  Lay it out flat (on the floor or a table) and line up the sides and bottom (if the bottom is not straight across, sew a straight seam on the shorter side).

Sew a straight seam (I used a zigzag stitch) all the way across the bottom of the shirt (be sure to backstitch at the beginning and end of all seams on this project for added stability).

To make a box-pleat bottom (that's a bottom that is flat like a brown paper bag (remember those?), open up the corner of the bottom seam and form a triangle.  See photos for detail.  Sew (and backstitch!) a seam across about about 3-4" down from the point.  The further down you sew, the larger the dimensions on the bottom of the bag will be.

First put your hand inside the corner.

Lay out the corner and smooth it flat with your hand into a triangle.

Sew across in a straight line from side to side.

Repeat for the opposite corner--be sure to make both sides the same size.

Turn the shirt right-side out again.  Smooth out wrinkles. 

Using scissors or rotary cutter (recommended if you have one), cut off the sleeves.  I cut away the factory stitching, but some people save it for extra strength. 

This would be saving the factory stitching...

This would be cutting it off...

Cut around the collar (about 1/2" around the front).

Then fold the shirt in half and cut away extra down as far as you prefer.  I cut some deeper since their graphic was not disturbed.  Some will either have to have a higher cut or lose some of their picture.

Voila!  You are done!

If you'd like, add a piece of covered (cover with clear tape or contact paper for easy wiping) cardboard for extra stability in the bottom.

Bonus:
The extra pieces can be used for the following:

Headband
(Yes, this is a self-protrait; no, I couldn't see my headband before I took the picture; yes, I should have adjusted it; no, I don't like this photo--at all!)

Tiny Hiny Crack Cover
(I'm going to have to patent this  before someone else does--it will be the newest craze!)

Necklace
(such strange things thrill them)

Here's everything you'll cut away: both sleeves, the collar, and a bit more under the collar

Two New Orleans-themed Tee-Bags

The "box pleat" or "gusset" bottom

Ribbon Tag Baby Blanket Tutorial for OHCE

Step-by-step instructions to make a ribbon tag baby blanket (any size, but will have to add more ribbons if it gets bigger than 18" square).

 

First you have to start with your solid piece, right side up. I used flannel for this one, but fleece works well, too.

Next, choose ten solid color and ten patterned ribbons in assorted widths and textures (I would not use any larger than 1 1/2" or smaller than 1/2"). I used a variety of satin and grosgrain ribbons cut into 4" lengths. Arrange them in a pattern of solid then patterned with five on each side.

Fold them in half, right side out (or wrong sides together--whichever gets the message out the best), and pin them with their raw edge on the raw edge of the flannel or fleece (right side up). I start with the center ribbon on all four sides then add the remaining ribbons all around.

This just shows the spacing on the pinned ribbons.

Lay the coordinating fabric wrong side down over the bottom layer. I turned up a corner so you could see it's wrong side down.

This photo shows you to block off about a 4" section (after you turn the corner) to leave open for turning. I insert pins sideways to remind myself to stop. When I don't, I usually regret it! 

 After sewing a 1/4" straight seam all the way around (but NOT in your open/turn area!), you will be left with one ribbon not attached--this is correct, so don't worry! Backstitch at the beginning and end to reinforce the opening edge.

Be sure to trim your corners BEFORE you turn it inside out! If you forget, go back and do it! Believe me...it's a must! 

Your corners should all look like this before you turn the blanket inside out.

You will now have to turn your blanket (push out the corners) and remove all pins EXCEPT the one on that last ribbon! Press the blanket with a warm iron unless you used fleece. If you used fleece skip the pressing--it melts! You may need to tug the ribbons out while pressing to get a nice edge.

Next, press the opening and pin the space to hold it closed until you do your finish stitching.

Starting in a corner, sew a small (maybe 1/8" or 3/16") seam all the way around ending at the corner you began with. Backstitch to reinforce seam.

The finished project! I pulled (with a seam ripper) the threads all to the back and clipped them off for a nice finished look. It's ready to give to a baby to love!